The production line uses advanced technology to gas-electric machinery as a whole, is color-coated steel insulation composite panel processing machinery and equipment-specific. Working speed with frequency conversion stepless speed regulation, can be combined into a single corrugated-type composite board, a full set of line agencies by the discharge pressure-type body composite bodies (beading glue heated curling slotted the whole complex pneumatic automatic cutting edge) combination, production of industrial plants and warehouses, and other housing wall panels indispensable equipment
Technical parameters:
Power Supply: 380V/50-60HZ
Total Power: 32KW
Production line speed :0-4M / min
Product Width: 1000mm 1200mm
Thickness :50-250mm
Annual production capacity: 600,000 square meters
Color thermal insulation composite sheet is a new type building material, inside, the outside layer is colored weathering steel used in construction, in the middle filled with rock wool, polystyrene (EPS), polyurethane, and glass wool insulation materials such as insulation. Protection from the bad weather , insulation, sound insulation, high strength characteristics, are widely used in various industrial plants, warehouses sports facilities, science and technology buildings, residential, activities, board room and so is ideal for roofing, wall enclosure material.
Thermal insulation composite panel features:
Light weight:
Less than 24KG weight per square meter can fully reduce the cost structure
Install fast: The light-weight composite panels, mosaic-style installation and can easily cut the characteristics of the decision to install a simple, can greatly improve efficiency, save construction period.
Fire: Core Sandwich plus the surface quality of materials and thermal insulation materials, non-burning or flame retardant materials, fully able to meet the fire code requirement.
Durability: Various studies indicate and abroad for more than 40 years of extensive use: with a special coating color steel plate protection in the new period of 10-15 years, after spraying once every 10 years anti-corrosion coating, plate life of up to 35 years.
Appearance: clear lines of steel plate, dozens of colors, it can tie any style of building needs, to achieve satisfactory results.
Insulation
The composite panels used insulation materials, rock wool, glass fiber cotton, polystyrene, polyurethane, etc. with low thermal conductivity with good thermal insulation effect.
Environmental Anti-Noise:
Strength of the composite panels of up to 40-50 decibels of noise is a very effective sound insulation.
Plasticity
Pressure plate can be cut to meet specific design needs.
High Strength
High-strength steel plate as the substrate, coupled with the most advanced design and roll forming, with excellent structural properties.
Satisfied customer: fast flexible design satisfied customer's requirement, modified to function.
Facilities Requirements:
(A) plant 1, flat-topped plants, plant no steeple can be used, but the cornices need to be more than 5 meters high
(B) Workshop effective width of not less than 8 m
(C) The effective length of greater than 48 meters workshop
(D) workshop on the ground should be flat cement, equipment, essential requirements according to the construction drawings and to be completed before the arrival of the equipment
(E) the basis of qualifying at the mouth of the most reasonable to set the overall electrical equipment into the gate and the need for power supply facilities, equipment using 380V, 5-wire power supply, the whole group a total installed capacity of 28KW
(F) plant should be equipped with 0.4-0.6M3 * 7kg/min compressed gas source